Lash Extension Adhesive, 1 second

£14.95 Excluding VAT

Out of stock

(1 customer review)

Optimum 01 is now …
MinkPro Rapid
Click Here To Order
same glue, rebranded

Lash Extension Adhesive, 1 second

Our adhesives are:

Optimum lash adhesives are

Made in the UK for us

Not tested on animals

Confirms to all UK and EU regulations

Creamy flexible consistency flows around the lash easily

Oil and water resistant

Strong flexible bonds

Excellent retention

5 gram
Colour – black
Fumes – medium
Curing Time – 1 second
Viscosity – Thin very fast curing – NOT suitable for beginners
Humidity  55%.
Our glues can cure at lower humidity when using our Retention Plus
Temperature – 21 – 23°C

Out of stock

Category:

Description

Lash Extension Adhesive, 1 second

5 gram

Colour – black
Fumes – medium
Curing Time – 1 second
Viscosity – Thin
Temperature – 21 – 23°C

Humidity  55%.

Our glues can cure at lower humidity when using our Retention Plus which also helps reduce vapours

Our glues can be oil resistant when using our full system

Oil Resistant lash glue when using Optimum primer/PH, glue and Retention Plus activator

Shelf Life – 9 months unopened.  3 month opened

Shake well before use – 30 seconds – 2 minutes
Dispense new ball every 15- 20 minutes
In hotter weather every 10 minutes
Place extension directly onto natural lash – do not swipe

If having retention issue with glues, use a little more ie a small bead and disperse the adhesive onto the natural lash with tiny up down motion – do not lose connection with the natural lash

If you notice that your retention is not as good as you would like:

decrease the level of humidity in the room
decrease the level of temperature in the room
switch to slightly slower drying adhesive
check you lash prep – we recommend using Optimum make up remover, Optimum primer/PH and Optimum Retention Plus

Fully safety assessed and EU approved
Not suitable for beginners

Prices are plus VAT

Storage Of Lash Adhesives

Storage of lash glues –  store upright a temperature range of between 16-24 °C.

Before use allow the bottle to stand at room temperature for about 30 minutes prior to treatment and shake the bottle for approximately 10-20 seconds before using.

Humidity  55%.

Room temperature should be between 21 – 23°C

If humidity is too high the eyelash adhesive will not cure correctly and shock polymerization takes place, causing a weaker bond with the natural lash.

If humidity is too low then the curing time will be slower as there is not enough moisture to ‘cure’ the eyelash adhesive and client will have poor retention with the adhesive.

Lash adhesives do not alter in their manufacturing process and ingredients.

If a lash tech has a problem with a glue it is usually incorrect storage, environment or usage.

Lash tech must clean the nozzle every time before replacing the lid

Lash tech must replace and tighten the lid  after each drop is dispensed to stop any moisture or air getting in

Lash tech must have correct working environment temperature and relative humidity

Keep away from lash lift vapours and peroxide vapours in a hairdressers as this can affect the glue

To help with glue vapours, correct airflow would be required in the working area.

It is recommended the correct masks are used when performing lash treatments.

Always read warning signs on glue labels.

Do not get lash glue on skin.

NOTE allergies can still occur even if patch test was carried out and it is advisable to inform clients of this

1 review for Lash Extension Adhesive, 1 second

  1. Sharelle (verified owner) –

    Just want to let you know how amazing the products are that I bought from the optimum range! I bought the optimum 01 glue and it’s by far the best glue I have ever used for Russian volume! I also got the PH balance and the retention plus and I can not believe the difference! Even my clients have been commenting on how much better they are lasting so thank you!

    Sharelle

Add a review

Your email address will not be published. Required fields are marked *

Go to Top